CubicTally.My project ↗
San Francisco–Oakland–Fremont

Concrete patio cost
in San Francisco.

Calculate patio volume and compare your supplier’s bag and bulk prices. Start with the published examples below, then use your own supplier quote for a delivered estimate.

6-sack ready-mix concrete — $219 per cubic yard

Material price. Published 6-sack mix price for a San Mateo County supplier. On-site batches are limited to 1/4, 1/2, 3/4 or 1 yard at a time. Sack count is not a verified PSI rating.

Saved pricing covers one pickup batch of 6-sack material, up to 1 yard. U-cart rental starts at $45 for two hours and is charged again on each dispatch; extra time and cleaning can add charges. Confirm vehicle requirements, availability and tax. Larger quantities or delivery require a separate quote.

Broadmoor Landscape Supply · checked 2026-09-14 ↗
MEASURE. PLAN. BUILD.

Make it your estimate.

Set your dimensions below. Apply a researched supplier rate in supplier options, or enter your own quote.

Built for real projects.
No sign-up. No guesswork.
ConcreteSlabs, patios & footingsGravelDriveways, paths & basesMulchGarden beds & landscapes
01

Your dimensions

YOUR PROJECT, IN PROFILEIllustrative · not to scale
20 ft12 ftDepth4 in
Concrete pourDepth entered by you
Allow a little extra

For uneven ground, spillage, and the unexpected.

Material & project assumptions

Density and bag values are editable planning assumptions. Confirm the product label or supplier specification.

Reinforcement quantities follow your inputs, not a structural design. Base volume excludes its own waste and compaction. Trench fill does not subtract pipe displacement.

02

Bagged or bulk?

Same project. Two ways to get it done.

THE BAGGED APPROACH
147 bags

11,760 lb to transport and handle.

Material estimateAdd your price
THE BULK APPROACHLess handling
3.5 cubic yards

1 estimated load at your truck capacity.

Bulk estimateAdd your price

Prices are optional. Tax and additional charges are included only when explicitly entered or covered by the saved terms. Placement labor is excluded. Estimates are not supplier quotes.

User-entered supplier prices; delivery and tax require confirmation.

No detailed supplier conditions were saved. Confirm delivery and other charges before ordering.

Product specifications and assumptions

Saving a reference preserves your inputs. Apply individual values only when they match the product you will buy.

  • Density: 2.025 US tons/yd³ — unverified planning assumption; confirm for this product.
  • Bag yield: 0.6 ft³; bag weight: 80 lb; confirm the selected bag product.
  • Shrinkage: 0% — entered planning allowance; no product-specific compaction rate verified.
Section budget and delivery planning

Destination and timing identify a delivery you plan to share. They do not establish supplier service eligibility. Combined orders are chosen below after saving sections.

Labor, equipment and other project items

All added item prices are your estimates, not researched local rates. Include applicable taxes in these unit prices. Blank charges remain unknown; enter zero only when confirmed. Save the section to update the project budget.

Supplier order terms

Amounts are flat dollar charges for this order. Leave unknown charges blank; enter zero only when confirmed. Weight limits use your entered density. Choosing another supplier clears these quote fields and the delivery location.

Your entered unit price, rounding, delivery, and short-load assumptions apply. Saved supplier minimums and brackets are not automatically enforced in manual quote mode.

Supplier prices & delivery rules

Set an optional weight capacity under Supplier order terms; loads use whichever volume or weight limit is lower. Confirm the payload limit and material density with your supplier. Short-load fees apply to each load below your threshold. Base material and rebar costs are excluded.

Entered delivery fees: $0.00 · Short-load fees: $0.00

Use a researched supplier price

These are product-specific examples, not regional averages. Applying one sets the listed unit rate. Review delivery, minimum-order and density terms before using the totals. Editing the unit rate switches to manual quote mode.

6-sack ready-mix concrete · $219.00/yd³

Material price. Broadmoor Landscape Supply — Published 6-sack mix price for a San Mateo County supplier. On-site batches are limited to 1/4, 1/2, 3/4 or 1 yard at a time. Sack count is not a verified PSI rating.

Saved pricing covers one pickup batch of 6-sack material, up to 1 yard. U-cart rental starts at $45 for two hours and is charged again on each dispatch; extra time and cleaning can add charges. Confirm vehicle requirements, availability and tax. Larger quantities or delivery require a separate quote.

Reviewed applications: Concrete slab, Concrete driveway, Concrete patio, Concrete garage floor, Concrete shed foundation, Concrete footing.

Source · checked 2026-09-14 ↗
03

Your project, together

0 / 50 sections

A patio. A path. The whole picture.

Add your first section to keep all your materials in one place.

A GOOD ESTIMATE STARTS HERE

Know what goes
into your numbers.

Every estimate shows its assumptions. Adjust waste, material density, and delivery rules to match your job. Use your supplier’s actual prices for a more useful comparison.See how we calculate

3.26 yd³ incl. allowance
FROM MEASUREMENTS TO AN ORDER

Plan your concrete patio

What to measure

  1. Measure the formed patio area, excluding planting openings and other unpoured spaces.
  2. Add steps and extra edge thickness as separate sections without counting the slab underneath twice.

Worked example: 12 ft × 10 ft × 4 in

12 × 10 × (4 ÷ 12) ÷ 27 = 1.4815 yd³ before allowance.

10% waste · 0% shrinkage

Neat volume
1.4815 yd³
Volume with allowances
1.6296 yd³

Illustrative dimensions and allowances. Use your project specification and supplier’s product data. Quantities shown are before supplier rounding.

Included in this quantity

The patio slab and the waste percentage you enter.

Measure or price separately

Steps, thickened edges, base, reinforcement, drainage, color additives and finishing.

Choose the specified product

Confirm the specified mix and finish with the supplier and installer. A colored or specialty mix may need a separate quote.

Before booking the order

For a small pour, compare whole bags with the supplier’s minimum bulk order, including transport and short-load charges.

Product and ordering reference: NRMCA CIP 31 — Ordering Ready Mixed Concrete · checked 2026-09-14. Worked quantities are CubicTally examples.