CubicTally.My project ↗
Philadelphia–Camden–Wilmington

Concrete driveway cost
in Philadelphia.

Compare bag handling with bulk delivery for your driveway dimensions. Start with the published examples below, then use your own supplier quote for a delivered estimate.

4000 PSI ready-mix, standard 2B stone — $140 per cubic yard

Material price. 2026 Pennsylvania-only supplier price list. This is a mix-specific material example, not a prescribed mix strength or installed price; confirm your design specification. The supplier meters and bills actual usage; order rounding here is a planning allowance.

The page lists $350 per truck for the Philly area, $110 extra on Saturday, and $3/minute beyond one hour. It also lists zone charges; confirm which charges apply, truck capacity, and minimums before ordering.

GSI Concrete · checked 2026-09-14 ↗
MEASURE. PLAN. BUILD.

Make it your estimate.

Set your dimensions below. Choose a published supplier price above, or enter your own quote.

Built for real projects.
No sign-up. No guesswork.
ConcreteSlabs, patios & footingsGravelDriveways, paths & basesMulchGarden beds & landscapes
01

Your dimensions

YOUR PROJECT, IN PROFILEIllustrative · not to scale
20 ft12 ftDepth4 in
Concrete pourDepth entered by you
Allow a little extra

For uneven ground, spillage, and the unexpected.

02

Bagged or bulk?

Same project. Two ways to get it done.

THE BAGGED APPROACH
147 bags

11,760 lb to transport and handle.

Material estimateAdd your price
THE BULK APPROACHLess handling
3.5 cubic yards

1 estimated load at your truck capacity.

Bulk estimateAdd your price

Prices are optional. Tax and additional charges are included only when explicitly entered or covered by the saved terms. Placement labor is excluded. Estimates are not supplier quotes.

User-entered supplier prices; delivery and tax require confirmation. No detailed supplier conditions were saved. Confirm delivery and other charges before ordering.

Product

Density and bag values are editable planning assumptions. Confirm the product label or supplier specification.

Reinforcement quantities follow your inputs, not a structural design. Base volume excludes its own waste and compaction. Trench fill does not subtract pipe displacement.

Saving a reference preserves your inputs. Apply individual values only when they match the product you will buy.

  • Density: 2.025 US tons/yd³ — unverified planning assumption; confirm for this product.
  • Bag yield: 0.6 ft³; bag weight: 80 lb; confirm the selected bag product.
  • Shrinkage: 0% — entered planning allowance; no product-specific compaction rate verified.
Price and delivery
Choose a supplier

These are product-specific examples, not regional averages. Applying one sets the listed unit rate. Review delivery, minimum-order and density terms before using the totals. Editing the unit rate switches to manual quote mode.

4000 PSI ready-mix, standard 2B stone · $140.00/yd³

Material price. GSI Concrete — 2026 Pennsylvania-only supplier price list. This is a mix-specific material example, not a prescribed mix strength or installed price; confirm your design specification. The supplier meters and bills actual usage; order rounding here is a planning allowance.

The page lists $350 per truck for the Philly area, $110 extra on Saturday, and $3/minute beyond one hour. It also lists zone charges; confirm which charges apply, truck capacity, and minimums before ordering.

Reviewed applications: Concrete slab, Concrete driveway, Concrete patio, Concrete garage floor, Concrete shed foundation, Concrete footing.

Source · checked 2026-09-14 ↗

Set an optional weight capacity under Supplier order terms; loads use whichever volume or weight limit is lower. Confirm the payload limit and material density with your supplier. Short-load fees apply to each load below your threshold. Base material and rebar costs are excluded.

Entered delivery fees: $0.00 · Short-load fees: $0.00

Supplier order terms

Amounts are flat dollar charges for this order. Leave unknown charges blank; enter zero only when confirmed. Weight limits use your entered density. Choosing another supplier clears these quote fields and the delivery location.

Your entered unit price, rounding, delivery, and short-load assumptions apply. Saved supplier minimums and brackets are not automatically enforced in manual quote mode.

Additional project costs

Destination and timing identify a delivery you plan to share. They do not establish supplier service eligibility. Combined orders are chosen below after saving sections.

Labor, equipment and other project items

All added item prices are your estimates, not researched local rates. Include applicable taxes in these unit prices. Blank charges remain unknown; enter zero only when confirmed. Save the section to update the project budget.

Buy bags for this estimate

147 whole bags at your 0.6 ft³ yield. The QUIKRETE Concrete Mix #1101 — 80 lb bag reference yield is 0.6 ft³ per 80 lb bag.

QUIKRETE Concrete Mix #1101 data sheet ↗Find a QUIKRETE dealer ↗

Some product links may be affiliate links. If you buy through them, CubicTally may earn a commission. That does not change the price you pay and does not mean the product is specified for your project. Confirm bag size, mixed yield and suitability on the package.

03

Your project, together

0 / 50 sections

Loading your saved project…

A GOOD ESTIMATE STARTS HERE

Know what goes
into your numbers.

Every estimate shows its assumptions. Adjust waste, material density, and delivery rules to match your job. Use your supplier’s actual prices for a more useful comparison.See how we calculate

FROM MEASUREMENTS TO AN ORDER

Plan your concrete driveway

What to measure

  1. Measure each driveway panel and apron separately when widths or thicknesses change.
  2. Use non-overlapping sections for turnouts. Record any thickened borders beyond the main slab thickness.

Worked example: 40 ft × 10 ft × 5 in

40 × 10 × (5 ÷ 12) ÷ 27 = 6.1728 yd³ before allowance.

10% waste · 0% shrinkage

Neat volume
6.1728 yd³
Volume with allowances
6.7901 yd³

Illustrative dimensions and allowances. Use your project specification and supplier’s product data. Quantities shown are before supplier rounding.

Included in this quantity

Concrete volume for one uniform driveway panel.

Measure or price separately

Demolition, excavation, subbase, reinforcement, joints, drainage and finishing labor.

Choose the specified product

Use the specified pavement mix and exposure requirements. Bagged concrete and ready mix have different handling and delivery arrangements.

Before booking the order

Confirm truck access and whether discharge can reach every panel. Combine deliveries only when the supplier, product, destination and placement timing match.

General product and ordering reference: NRMCA CIP 31 — Ordering Ready Mixed Concrete · checked 2026-09-14. Worked quantities are CubicTally examples.

General ready-mix ordering guidance; not a local supplier offer or a project mix specification. Any local prices on this page are attributed separately to the suppliers offering them.